Stick and Tissue Forum
https://www.stickandtissue.com/cgi-bin/yabb2/YaBB.pl
How to fly model airplanes >> Tether/Swing Flying Models >> CLG for flying models
https://www.stickandtissue.com/cgi-bin/yabb2/YaBB.pl?num=1553648308

Message started by AchmadDjd on Mar 26th, 2019 at 6:58pm

Title: CLG for flying models
Post by AchmadDjd on Mar 26th, 2019 at 6:58pm
Is it possible to use catapult for flying wings?

Title: Re: CLG for flying models
Post by Sky9pilot on Mar 27th, 2019 at 9:40am
Not sure I'm clear on just what you are asking.  Catapult gliders could be rigged to be swing models by attaching the line to the wing tip near the leading edge.  You might have to experiment with location attachment and adjusting rudder to keep the glider to the outside of the circle as you do with control line models.  Hope this helps.  I encourage you to read the earlier post to see just what Al did and other modelers as well.

Stick and Tissue Forum » Powered by YaBB 2.5 AE!
YaBB Forum Software © 2000-2010. All Rights Reserved.