Stick and Tissue Forum
https://www.stickandtissue.com/cgi-bin/yabb2/YaBB.pl
Welcome Center >> General Questions >> Vynil / Wood filler question
https://www.stickandtissue.com/cgi-bin/yabb2/YaBB.pl?num=1575490575

Message started by bigrip74 on Dec 4th, 2019 at 2:16pm

Title: Vynil / Wood filler question
Post by bigrip74 on Dec 4th, 2019 at 2:16pm
QUESTION: I just mixed 50/50 vinyl spackling and wood filler together with water to fill dents in a canopy mold. My question is will the heat to melt the plastic cause the vinyl to release fro the mold?

Bob

Title: Re: Vynil / Wood filler question
Post by Sky9pilot on Dec 4th, 2019 at 2:50pm
Will you be sealing the mold with anything?  I know that some modelers have made molds for canopies using blue foam so I don't think you'll find any problem with it melting the mixture.  I would suggest some powder dusting of the mold for a release anyway. 

Stick and Tissue Forum » Powered by YaBB 2.5 AE!
YaBB Forum Software © 2000-2010. All Rights Reserved.