Welcome, Guest. Please Login or Register
Stick and Tissue Logo
 
  HomeHelpSearchLoginRegister  
 
 
Page Index Toggle Pages: 1
Send Topic Print
Canard CLG (Read 1507 times)
Reply #3 - Feb 5th, 2017 at 5:18pm

Sky9pilot   Offline
Administrator
Stick & Tissue
Kelso, WA 98626 USA

Posts: 11329
*****
 
I'd be happy to post it if you can't get it to post yourself.
Tom
 

If God is your Co-pilot...switch seats...
Your attitude will determine your altitude!- John Maxwell
And ye shall know the truth, and the truth shall set you free. Jn 8:32
IP Logged
 
Reply #2 - Feb 5th, 2017 at 1:33am

Charac-52   Offline

Drink tea, and build models

Posts: 13
 
I do not have any plans for my canard,  I built it to the ILAR (it looks about right) method and got lucky with this one. I did not need to add any weight for trimming. On the first flight I had not sealed the balsa so she was absorbing some moisture after a few landings. For the second flight I sprayed a light coat of laquer all over and a second lightly dusted coat on the underside only. I will draw up the model if anyone is interested in building one.
Steve
 
IP Logged
 
Reply #1 - Feb 4th, 2017 at 3:05pm

Sky9pilot   Offline
Administrator
Stick & Tissue
Kelso, WA 98626 USA

Posts: 11329
*****
 
Great model you have there.  Looks like she is trimmed out very well.  The last video shows a very smooth glide.  Well done.  Did you draw up any plans of this little gem?
Tom
 

If God is your Co-pilot...switch seats...
Your attitude will determine your altitude!- John Maxwell
And ye shall know the truth, and the truth shall set you free. Jn 8:32
IP Logged
 
Feb 4th, 2017 at 1:21pm

Charac-52   Offline

Drink tea, and build models

Posts: 13
 
This is my Canard 12 inch clg build, to my amazement she flew straight off the bench with no trimming out.
See a couple of flight vids below.

...

VIDEO 1

https://youtu.be/hm92UbGjBIc

VIDEO 2

https://youtu.be/O_8SgT_-35U
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print