Welcome, Guest. Please Login or Register
Stick and Tissue Logo
Page Index Toggle Pages: 1
Send Topic Print
KP 01 motors (Read 272 times)
Reply #1 - Dec 2nd, 2019 at 12:21pm

Kaintuck   Offline
Junior Member
Controled landings are
Lawrenceburg tn

Posts: 77
Like to see the answers...i just got a kp00 and trix timer....I’m thinking a tiny lips and 10” piper Cub?
IP Logged
Feb 10th, 2019 at 2:21am

Kiwi   Offline
Senior Member
New Zealand

Posts: 296
I have one of the older KP 01 motors that came with a housing on the back which holds 4 50mAh Nicads.
It's been hanging around for about 10 years and I figure it's time I used it.
I would like to upgrade it to the later version which are set up for Lipos. Before I remove the batteries and housing is there any tips, tricks or technique I should be aware of?
I would like to use one of my Zombie controllers to control it and also, if it's not too hard, the double plug set up   that came with the motor whereby the charging lead goes into a charging jack which also acts as the power switch

Pilots without Mechanics are just Pedestrians with Fancy Watches
IP Logged
Page Index Toggle Pages: 1
Send Topic Print