Stick and Tissue Forum
How to build model airplanes >> EZB, 35cm, Ministick, AROG, Living Room Models >> indoor news and views dot com
https://www.stickandtissue.com/forum/cgi-bin/yabb2/YaBB.pl?num=1532185638

Message started by Sky9pilot on Jul 21st, 2018 at 9:07am

Title: indoor news and views dot com
Post by Sky9pilot on Jul 21st, 2018 at 9:07am
Just found this site through a video on YouTube: Click Here
...everything you've ever wanted to know about this phase of indoor Free Flight modeling Indoor News and Views.Com ...check it out: Click Here

Here's an article on building these type models with hobby shop balsa starting at page #34 entitled "Hobby Shop EZB"
by Larry Coslick
Illustrated by Steve Gardner Click Here

Here's a site and source for the micro film for covering the flying surfaces: IndoorSpecialties.com Click Here
Tom

Title: Re: indoor news and views dot com
Post by Sky9pilot on Jul 21st, 2018 at 9:28am
Penny planes were originally set as a beginners class and the Penny was selected as the starter class.  At the time a Penny weighed 3.1 grams and that's the minimum weight of the "Penny Class" aircraft with an 18" span 21" length. 

Stick and Tissue Forum » Powered by YaBB 2.6.11!
YaBB Forum Software © 2000-2020. All Rights Reserved.