Stick and Tissue Forum - Using Foam for Modeling

Stick and Tissue Forum › Building Model Airplanes › Using Foam for Modeling

Using Foam for Modeling
Foam can be used for many various parts of Free Flight Rubber Powered models. You can fashion many complex shapes out of foam for use in your models; such as wheels, scoops, various gun fairing and bumps, tail cones etc. Just understand that FAC (Flying Aces Club) doesn't accept the use of foam for building whole models. Here's some techniques and tricks for using foam.

(Moderators: thymekiller, BillParker, alfakilo, Sky9pilot)

Topics: 5
Posts: 14

Pages: 1

Subject / Started By	Replies	Views	Last Post
Construction of a 1/20th scale from polystyrene Started Oct 11^th, 2019 at 11:07am by Sky9pilot	1	1698	Oct 13^th, 2019 at 12:31pm By: neoflight
Using foam in our models Started Oct 10^th, 2019 at 11:03am by Sky9pilot	8	1724	Oct 12^th, 2019 at 9:59am By: Sky9pilot
Foam Free Flight Builds from HPA Started Oct 11^th, 2019 at 12:19pm by Sky9pilot	0	508	Oct 11^th, 2019 at 12:19pm By: Sky9pilot
Building With Foam- A Beginners Guide and Link Started Oct 10^th, 2019 at 2:22pm by Sky9pilot	0	654	Oct 10^th, 2019 at 2:22pm By: Sky9pilot
Lost Foam Technique Started Oct 10^th, 2019 at 11:55am by Sky9pilot	0	487	Oct 10^th, 2019 at 11:55am By: Sky9pilot

Pages: 1

Normal Topic

Sticky Topic

Locked Topic

Sticky Locked Topic

Moved Topic

Global Announcement

Locked Global Announcement

Hot Topic (More than 10 Replies)

Very Hot Topic (More than 25 Replies)

You can view Topics in this Board.

You cannot post replies to Topics in this Board.
You cannot start new Topics in this Board.
You cannot post Attachments in this Board.
You cannot start Polls in this Board.

‹ Board Index Top