Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic sander (Read 2556 times)
wind surf
New Member
*
Offline


I Love YaBB 2.5 AE!

Posts: 16
Joined: Apr 12th, 2015
Re: sander
Reply #4 - Jul 23rd, 2015 at 11:10pm
Print Post  
I used 5 minute epoxy. Im falling in love with tite bond i think i will try it.I really like the pencil balancer
  
Back to top
 
IP Logged
 
bigrip74
Administrator
*****
Offline


What did l do this time!

Posts: 6416
Location: Austin, Texas
Joined: Jan 14th, 2013
Re: sander
Reply #3 - Jul 23rd, 2015 at 9:31pm
Print Post  
Sky9pilot wrote on Jul 23rd, 2015 at 8:07pm:
wind surf...great idea with the stick glued to the back.  I use several grits of nail files/emeryboards.  I also cut the end of one emeryboard to a taper from width to approximately 1/8" to get into tight spaces or sanding reglued broken stringers to limit the sanding around the glued area. 

What type of glue did you use to glue the stick "WS"?

I also have a rough sanding stick with 80 grit that's made from a wooden paint stirrer. Lots of good sticks from Lowe's and Home Depot that work good to convert to sanding sticks!

Always like to see good ideas I can steal!!! Roll Eyes Shocked Grin Cheesy

Sky9pilot


NOPE! you borrow Tom, I steal good ideas Cheesy

Bob
  

IF IT AINT BROKE DONT FIX IT!
Back to top
IP Logged
 
Sky9pilot
Administrator
*****
Offline


Stick & Tissue

Posts: 11609
Location: Kelso, WA 98626 USA
Joined: Jan 9th, 2010
Re: sander
Reply #2 - Jul 23rd, 2015 at 8:07pm
Print Post  
wind surf...great idea with the stick glued to the back.  I use several grits of nail files/emeryboards.  I also cut the end of one emeryboard to a taper from width to approximately 1/8" to get into tight spaces or sanding reglued broken stringers to limit the sanding around the glued area. 

What type of glue did you use to glue the stick "WS"?

I also have a rough sanding stick with 80 grit that's made from a wooden paint stirrer. Lots of good sticks from Lowe's and Home Depot that work good to convert to sanding sticks!

Always like to see good ideas I can steal!!! Roll Eyes Shocked Grin Cheesy

Sky9pilot
  

If God is your Co-pilot...switch seats...
Your attitude will determine your altitude!- John Maxwell
And ye shall know the truth, and the truth shall set you free. Jn 8:32
Back to top
IP Logged
 
jwwasham
3 Star Member
***
Offline


Go Lemmings, Go!

Posts: 233
Location: Oklahoma, USA
Joined: May 13th, 2015
Re: sander
Reply #1 - Jul 23rd, 2015 at 5:33pm
Print Post  
Good idea!  Thanks. Smiley

John
  

Experience is what you get, when you don't get what you want.
"Simplify, then add lightness"  Colin Chapman
A closed mind is just a useless weight on the shoulders.
Back to top
 
IP Logged
 
wind surf
New Member
*
Offline


I Love YaBB 2.5 AE!

Posts: 16
Joined: Apr 12th, 2015
sander
Jul 23rd, 2015 at 12:23pm
Print Post  
adding this stick to nail file gives more control and takes out the flex.I use these to sand leading edge. its cheap and works for me
  

( 399 KB | 3 Downloads )
WIN_20150723_111410.JPG
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint