Stick and Tissue Forum - sander

Stick and Tissue Forum › Building Model Airplanes › Gadgets,Jigs, Tools and Devices to make modeling better › sander

(Moderator: Sky9pilot)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

Normal Topic

sander (Read 3193 times)

wind surf New Member Offline I Love YaBB 2.5 AE! Posts: 16 Joined: Apr 12^th, 2015	Re: sander Reply #4 - Jul 23^rd, 2015 at 11:10pm	Print Post
	I used 5 minute epoxy. Im falling in love with tite bond i think i will try it.I really like the pencil balancer


	IP Logged

bigrip74 Ex Member	Re: sander Reply #3 - Jul 23^rd, 2015 at 9:31pm	Print Post
	Sky9pilot wrote on Jul 23^rd, 2015 at 8:07pm: wind surf...great idea with the stick glued to the back. I use several grits of nail files/emeryboards. I also cut the end of one emeryboard to a taper from width to approximately 1/8" to get into tight spaces or sanding reglued broken stringers to limit the sanding around the glued area. What type of glue did you use to glue the stick "WS"? I also have a rough sanding stick with 80 grit that's made from a wooden paint stirrer. Lots of good sticks from Lowe's and Home Depot that work good to convert to sanding sticks! Always like to see good ideas I can steal!!! Sky9pilot NOPE! you borrow Tom, I steal good ideas Bob


	IP Logged

Sky9pilot Administrator Offline Stick & Tissue Posts: 13264 Location: Kelso, WA 98626 USA Joined: Jan 9^th, 2010	Re: sander Reply #2 - Jul 23^rd, 2015 at 8:07pm	Print Post
	wind surf...great idea with the stick glued to the back. I use several grits of nail files/emeryboards. I also cut the end of one emeryboard to a taper from width to approximately 1/8" to get into tight spaces or sanding reglued broken stringers to limit the sanding around the glued area. What type of glue did you use to glue the stick "WS"? I also have a rough sanding stick with 80 grit that's made from a wooden paint stirrer. Lots of good sticks from Lowe's and Home Depot that work good to convert to sanding sticks! Always like to see good ideas I can steal!!! Sky9pilot

	If God is your Co-pilot...switch seats... Your attitude will determine your altitude!- John Maxwell And ye shall know the truth, and the truth shall set you free. Jn 8:32
	Skype/VoIP Facebook IP Logged

jwwasham 3 Star Member Offline Go Lemmings, Go! Posts: 232 Location: Oklahoma, USA Joined: May 13^th, 2015	Re: sander Reply #1 - Jul 23^rd, 2015 at 5:33pm	Print Post
	Good idea! Thanks. John

	Experience is what you get, when you don't get what you want. "Simplify, then add lightness" Colin Chapman A closed mind is just a useless weight on the shoulders.
	IP Logged

wind surf New Member Offline I Love YaBB 2.5 AE! Posts: 16 Joined: Apr 12^th, 2015	sander Jul 23^rd, 2015 at 12:23pm	Print Post
	adding this stick to nail file gives more control and takes out the flex.I use these to sand leading edge. its cheap and works for me

	( 399 KB \| 70 Downloads )
	IP Logged

Page Index Toggle

Pages: 1

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

Stick and Tissue Forum » Powered by YaBB 2.6.11!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge