Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Rib slotter (Read 1778 times)
k k iyer
New Member
*
Offline



Posts: 11
Location: India
Joined: Mar 5th, 2016
Balsa stripper
Reply #3 - Mar 15th, 2016 at 10:35am
Print Post  
Here's a pic or two of the balsa stripper.
Just 2 ply plates, a 2mm spacer and a #11 blade.
  

( 171 KB | 3 Downloads )
image_008.jpeg
( 266 KB | 0 Downloads )
image_009.jpeg
Back to top
 
IP Logged
 
k k iyer
New Member
*
Offline



Posts: 11
Location: India
Joined: Mar 5th, 2016
Re: Rib slotter
Reply #2 - Mar 15th, 2016 at 10:29am
Print Post  
Pics from my iPad mini won't load as they are over 400kb.
This pic of the finished rib slotter and sample cuts is from my older iPad2.
  
Back to top
 
IP Logged
 
k k iyer
New Member
*
Offline



Posts: 11
Location: India
Joined: Mar 5th, 2016
Re: Rib slotter
Reply #1 - Mar 15th, 2016 at 10:25am
Print Post  
Pics won't load.
Another attempt
  

( 251 KB | 2 Downloads )
image_007.jpeg
Back to top
 
IP Logged
 
k k iyer
New Member
*
Offline



Posts: 11
Location: India
Joined: Mar 5th, 2016
Rib slotter
Mar 15th, 2016 at 10:10am
Print Post  
Hi everyone,
Joined just last week.
Made a balsa stripper, and a rib slotter to make accurate cuts in ribs for spars.
Its just 2 blades with a spacer.
Used #24 as ran out of #11 blades.
The tip cuts 2x2mm, the base 2x4mm.
Pics self explanatory, i hope...
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint