Stick and Tissue Forum - Request entity too big

Stick and Tissue Forum › Welcome Center › How to post Photos on S&T or Shrink Your Photos › Request entity too big

(Moderators: thymekiller, BillParker, Sky9pilot)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

Normal Topic

Request entity too big (Read 4161 times)

New Builder 5 Star Member Offline Posts: 1374 Location: Amherstburg, Ontario, Canada Joined: Dec 25^th, 2016	Re: Request entity too big Reply #8 - Jan 17^th, 2017 at 2:56pm	Print Post
	Problem solved. I'll be posting my Ryan STA pics to the New Build section, probably tomorrow morning. Thanks again for all the feedback and help. Irfanview finally made sense and works fine.

	"Skill comes by the constant repetition of familiar feats rather than by a few overbold attempts for which the performer is yet poorly prepared." Wilbur Wright
	IP Logged

New Builder 5 Star Member Offline Posts: 1374 Location: Amherstburg, Ontario, Canada Joined: Dec 25^th, 2016	Re: Request entity too big Reply #7 - Jan 17^th, 2017 at 2:08pm	Print Post
	Thanks to all for the help but still having difficulty reducing my photos to a size below 750Mb. Tried resizing a resized photo but no luck. Will keep trying until I find a solution, really want to participate. Thanks again.

	"Skill comes by the constant repetition of familiar feats rather than by a few overbold attempts for which the performer is yet poorly prepared." Wilbur Wright
	IP Logged

Sky9pilot Administrator Offline Stick & Tissue Posts: 12995 Location: Kelso, WA 98626 USA Joined: Jan 9^th, 2010	Re: Request entity too big Reply #6 - Jan 11^th, 2017 at 12:36pm	Print Post
	New Builder wrote on Jan 10^th, 2017 at 2:08pm: Thank you for the feedback. I already set the picture size to 4 x 6. This should create a pic of the right size, I will try tomorrow. Thank you again. I'm not sure that will reduce the pixel size of the picture appropriately. I have Photoshop that I use. As Ian has recommended the link will assist you in resizing the pictures. Usually when you hover your cursor over the saved file it will give you the size of the file that's been saved. Tom
	« Last Edit: Jul 7^th, 2017 at 6:41pm by Sky9pilot »
	If God is your Co-pilot...switch seats... Your attitude will determine your altitude!- John Maxwell And ye shall know the truth, and the truth shall set you free. Jn 8:32
	Skype/VoIP Facebook IP Logged

New Builder 5 Star Member Offline Posts: 1374 Location: Amherstburg, Ontario, Canada Joined: Dec 25^th, 2016	Re: Request entity too big Reply #5 - Jan 10^th, 2017 at 2:08pm	Print Post
	Thank you for the feedback. I already set the picture size to 4 x 6. This should create a pic of the right size, I will try tomorrow. Thank you again.

	"Skill comes by the constant repetition of familiar feats rather than by a few overbold attempts for which the performer is yet poorly prepared." Wilbur Wright
	IP Logged

pb_guy 5 Star Member Offline So I'm just a kid at heart. Posts: 2067 Location: Youbou, BC, Vancouver Island Joined: Oct 15^th, 2014	Re: Request entity too big Reply #4 - Jan 10^th, 2017 at 1:37pm	Print Post
	Don't worry about fiddling with camera settings. You need to get a photo resizing program. I use a free one called Irfanview. I select my photo, and under "Image" use "resize/resample". It has options to resize to particular pre-set size, or as a percentage of the original picture. Irfanview available here: http://www.irfanview.com/ ian


	IP Logged

New Builder 5 Star Member Offline Posts: 1374 Location: Amherstburg, Ontario, Canada Joined: Dec 25^th, 2016	Re: Request entity too big Reply #3 - Jan 10^th, 2017 at 11:42am	Print Post
	Cut the post by 90% and one photo and still rejected. Queried the actual photo and the size is 1.77Mb. Can this be caused by the photo size setting on the camera?

	"Skill comes by the constant repetition of familiar feats rather than by a few overbold attempts for which the performer is yet poorly prepared." Wilbur Wright
	IP Logged

New Builder 5 Star Member Offline Posts: 1374 Location: Amherstburg, Ontario, Canada Joined: Dec 25^th, 2016	Re: Request entity too big Reply #2 - Jan 10^th, 2017 at 11:15am	Print Post
	Thanks for the feedback. I will try again.

	"Skill comes by the constant repetition of familiar feats rather than by a few overbold attempts for which the performer is yet poorly prepared." Wilbur Wright
	IP Logged

staubkorb 5 Star Member Offline Stick & Tissue Posts: 1409 Location: Germany Joined: Oct 22^nd, 2008	Re: Request entity too big Reply #1 - Jan 10^th, 2017 at 9:17am	Print Post
	Probably the attachments (photos) were too large, or the whole message was too long (large text and 6x 400Kb photos). Explanation can be found HERE.

	WWWoFF Wonderful Wacky World of Free Flight (with a bit of rc thrown in for giggles) Comparing Spammers to a pile of organic waste is an insult to the organic waste!
	Skype/VoIP IP Logged

New Builder 5 Star Member Offline Posts: 1374 Location: Amherstburg, Ontario, Canada Joined: Dec 25^th, 2016	Request entity too big Jan 10^th, 2017 at 7:59am	Print Post
	Tried to popst my build this AM but kept getting the error that the request entity was too big and think my post was denied. Any guidance here?

	"Skill comes by the constant repetition of familiar feats rather than by a few overbold attempts for which the performer is yet poorly prepared." Wilbur Wright
	IP Logged

Page Index Toggle

Pages: 1

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

Stick and Tissue Forum » Powered by YaBB 2.6.11!
YaBB Forum Software © 2000-2023. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge