Stick and Tissue Forum - New bee to co2

Stick and Tissue Forum › Building Model Airplanes › CO2 Stick and Tissue Free Flight Builds › New bee to co2

(Moderators: thymekiller, BillParker, Sky9pilot)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

Normal Topic

New bee to co2 (Read 1601 times)

staubkorb 5 Star Member Offline Stick & Tissue Posts: 1409 Location: Germany Joined: Oct 22^nd, 2008	Re: New bee to co2 Reply #3 - Jan 14^th, 2018 at 3:36pm	Print Post
	This particular motor was developed for FAI duration (F1k), where the only restrictions are the tank volume (3cc) and wing area (186in²). It is also a fairly heavy bugger @ 16 grams w/o prop. A 30in span model or bipe of similar size would probably be OK, but will be somewhat hampered by the small tank.

	WWWoFF Wonderful Wacky World of Free Flight (with a bit of rc thrown in for giggles) Comparing Spammers to a pile of organic waste is an insult to the organic waste!
	Skype/VoIP IP Logged

Snapped New Member Offline I Love YaBB 2.5 AE! Posts: 8 Joined: Jan 1^st, 2018	Re: New bee to co2 Reply #2 - Jan 11^th, 2018 at 4:45am	Print Post
	It seems you are right the motor is way to big.[img] Probably use on another build. My question now is if this lets say was for a 30 inch wingspan could I use it on let's say a biplane of less wing span but equal wings in square inch area?


	IP Logged

staubkorb 5 Star Member Offline Stick & Tissue Posts: 1409 Location: Germany Joined: Oct 22^nd, 2008	Re: New bee to co2 Reply #1 - Jan 9^th, 2018 at 10:03am	Print Post
	The "preferred" size for a peanut scale model is the Gasparin G24 or 28. I'm not familiar with the GMW73 (is it a Gasparin or G-Mot?), but assume that it would be a bit too much, both in physical size and power. Could you include a photo of the motor specs?
	« Last Edit: Jan 14^th, 2018 at 2:25pm by staubkorb »
	WWWoFF Wonderful Wacky World of Free Flight (with a bit of rc thrown in for giggles) Comparing Spammers to a pile of organic waste is an insult to the organic waste!
	Skype/VoIP IP Logged

Snapped New Member Offline I Love YaBB 2.5 AE! Posts: 8 Joined: Jan 1^st, 2018	New bee to co2 Jan 8^th, 2018 at 10:18am	Print Post
	Hi all I am new to s and t. I have been building models on and off for a few years now. I want to do this albatross with co2 I have these g/s motors and have no real idea if they can be used for peanut scale builds? I need some help.

	( 280 KB \| 78 Downloads )
	IP Logged

Page Index Toggle

Pages: 1

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

Stick and Tissue Forum » Powered by YaBB 2.6.11!
YaBB Forum Software © 2000-2023. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge