Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Riving balsa sheets (Read 431 times)
Sky9pilot
Administrator
*****
Offline


Stick & Tissue

Posts: 11798
Location: Kelso, WA 98626 USA
Joined: Jan 9th, 2010
Riving balsa sheets
Jun 22nd, 2018 at 8:48pm
Print Post  
I hadn't heard of riving before and just what it meant.  I found this on HPA and can see many benefits in making longerons and stringers for fuselages.  David Lofthouse talks about this process in his Thalman T-4 build in the Free Flight Scale board, reply #3.  It has to do with finding the grain of a 36" sheet and the grain doesn't always run parallel with the length of the sheet. Here's the link: Click Here
I'm going to give this a try to see if it won't help me to keep from breaking so many stringers and longerons!!!  Many thanks to David!!! Smiley
Tom
  

If God is your Co-pilot...switch seats...
Your attitude will determine your altitude!- John Maxwell
And ye shall know the truth, and the truth shall set you free. Jn 8:32
Back to top
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint