Page Index Toggle Pages: 1 2 [3]  Send TopicPrint
Very Hot Topic (More than 25 Replies) Hiller X-2-235 (Read 3790 times)
Ray_K
5 Star Member
*****
Offline


to create that which never
exsisted before.

Posts: 518
Joined: Feb 15th, 2016
Re: Hiller X-2-235
Reply #1 - Jul 16th, 2018 at 3:58pm
Print Post  
7-16-2018

Here is the new gear box ready to go. It weighs in at 7.5 grams.

Cheers, Ray K.
  

( 133 KB | 7 Downloads )
Gear_box_X.jpg
( 128 KB | 6 Downloads )
Gear_box_xx.jpg
Back to top
 
IP Logged
 
Ray_K
5 Star Member
*****
Offline


to create that which never
exsisted before.

Posts: 518
Joined: Feb 15th, 2016
Hiller X-2-235
Jul 13th, 2018 at 5:49pm
Print Post  
7-13-2018

I have been toying with the idea of building a scale co-axial model helicopter with an internal gear box and drive system so that the rubber motor will be within the fuselage and not direct drive in a tube. I should have the gear box done by tomorrow and go from there depending on how much packing my wife needs me to do before our move in Sept.

Cheers, Ray K.
  

( 90 KB | 5 Downloads )
Hiller_X-2-235_b.jpg
( 86 KB | 6 Downloads )
Hiller_X-2-235_a.jpg
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1 2 [3] 
Send TopicPrint