Stick and Tissue Forum - Hiller X-2-235

Stick and Tissue Forum › Rubber Powered Helicopters › Free Flight Helicopters › Hiller X-2-235

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: [1] 2 3

Very Hot Topic (More than 25 Replies)

Hiller X-2-235 (Read 13317 times)

Ray_K 5 Star Member Offline to create that which never exsisted before. Posts: 518 Joined: Feb 15^th, 2016	Re: Hiller X-2-235 Reply #31 - Jan 15^th, 2019 at 6:43pm	Print Post
	1-15-2019 Hi Paul, I am well, I haven't forgot about this one, everything is about ready, just working on a simple helicopter design for the helicopter cook up so that all will be able to build it, once I have that done I will get back to this project and send you everything you will need to build this along with me. Cheers, Ray K.


	IP Logged

shipwreck 4 Star Member Offline Navy Vet Posts: 285 Location: Medina Ohio Joined: Jun 20^th, 2018	Re: Hiller X-2-235 Reply #30 - Jan 15^th, 2019 at 3:00pm	Print Post
	Hope your well Ray Paul


	IP Logged

Ray_K 5 Star Member Offline to create that which never exsisted before. Posts: 518 Joined: Feb 15^th, 2016	Re: Hiller X-2-235 Reply #29 - Sep 6^th, 2018 at 8:43pm	Print Post
	9-6-2018 Got it Paul. Thanks. Cheers, Ray K.


	IP Logged

shipwreck 4 Star Member Offline Navy Vet Posts: 285 Location: Medina Ohio Joined: Jun 20^th, 2018	Re: Hiller X-2-235 Reply #28 - Aug 29^th, 2018 at 8:10am	Print Post
	I sent you and ray a message. Hope they came throu. Paul


	IP Logged

Sky9pilot Administrator Offline Stick & Tissue Posts: 13265 Location: Kelso, WA 98626 USA Joined: Jan 9^th, 2010	Re: Hiller X-2-235 Reply #27 - Aug 24^th, 2018 at 5:50pm	Print Post
	Shipwreck...just click on Ray's name and a box will come up with a PM (Personal Message) or email option. Click on the one you want and proceed from there! Tom

	If God is your Co-pilot...switch seats... Your attitude will determine your altitude!- John Maxwell And ye shall know the truth, and the truth shall set you free. Jn 8:32
	Skype/VoIP Facebook IP Logged

Ray_K 5 Star Member Offline to create that which never exsisted before. Posts: 518 Joined: Feb 15^th, 2016	Re: Hiller X-2-235 Reply #26 - Aug 24^th, 2018 at 4:41pm	Print Post
	8-24-2018 The moving truck comes next week Saturday, 1st of sept, once I receive your address I will get everything ready to send to you. You should be able to send me and e-mail with your mailing address. Cheers, Ray K.


	IP Logged

shipwreck 4 Star Member Offline Navy Vet Posts: 285 Location: Medina Ohio Joined: Jun 20^th, 2018	Re: Hiller X-2-235 Reply #25 - Aug 24^th, 2018 at 9:41am	Print Post
	Looks great Ray. hope you move is going well or went well. I been working in the office and doing hand therapy so like you not much play time. I will send ya a message with my address. soon as i figure out how to do it... Thanks Paul


	IP Logged

Ray_K 5 Star Member Offline to create that which never exsisted before. Posts: 518 Joined: Feb 15^th, 2016	Re: Hiller X-2-235 Reply #24 - Aug 15^th, 2018 at 3:56pm	Print Post
	8-15-2018 Not sure how I will make the upper and lower rotor hub sets yet but I have a few ideas, it will probably involve styrene and nylon tubing. Cheers, Ray K.


	IP Logged

Ray_K 5 Star Member Offline to create that which never exsisted before. Posts: 518 Joined: Feb 15^th, 2016	Re: Hiller X-2-235 Reply #23 - Aug 15^th, 2018 at 3:51pm	Print Post
	8-15-2018 Hi Paul, I am doing well Thank you, busy with my move and overtime at work so not a lot of time to play but sheet 2 is completed, more than what this photo shows, and all formers and patterns have be drawn out and checked for fit. Pinion drive has also been made, she is ready to build but I won't be able to start it until the 2nd week in Sept. If you send me your mailing address I will send you plans and gear sets so you can build it along with me. Cheers, Ray K.

	( 125 KB \| 95 Downloads ) ( 152 KB \| 70 Downloads ) ( 124 KB \| 84 Downloads ) ( 63 KB \| 100 Downloads ) ( 70 KB \| 81 Downloads )
	IP Logged

shipwreck 4 Star Member Offline Navy Vet Posts: 285 Location: Medina Ohio Joined: Jun 20^th, 2018	Re: Hiller X-2-235 Reply #22 - Aug 14^th, 2018 at 5:07pm	Print Post
	Hiya Ray, Hope all is well with you. Been busy here so haven't had time to check on sight. How's sheet 2 coming along? Take care Paul


	IP Logged

Ray_K 5 Star Member Offline to create that which never exsisted before. Posts: 518 Joined: Feb 15^th, 2016	Re: Hiller X-2-235 Reply #21 - Aug 4^th, 2018 at 4:47pm	Print Post
	8-4-2018 Thanks Paul, sheet 2 is almost done and all formers and sub formers are finished as well, she is pretty much ready to build and I have all mechanical parts already built as well. I will post more pictures on Monday. Cheers, Ray K.


	IP Logged

shipwreck 4 Star Member Offline Navy Vet Posts: 285 Location: Medina Ohio Joined: Jun 20^th, 2018	Re: Hiller X-2-235 Reply #20 - Aug 4^th, 2018 at 3:32pm	Print Post
	Cool picture. Plans look good to Ray. Paul


	IP Logged

Ray_K 5 Star Member Offline to create that which never exsisted before. Posts: 518 Joined: Feb 15^th, 2016	Re: Hiller X-2-235 Reply #19 - Aug 3^rd, 2018 at 5:51pm	Print Post
	8-3-2018 This is the only picture I have found of the Hiller. Cheers, Ray K.

	( 33 KB \| 87 Downloads )
	IP Logged

Ray_K 5 Star Member Offline to create that which never exsisted before. Posts: 518 Joined: Feb 15^th, 2016	Re: Hiller X-2-235 Reply #18 - Jul 30^th, 2018 at 3:38pm	Print Post
	7-30-2018 Here is the revised drawing of sheet # 1. Cheers, Ray K.

	( 116 KB \| 75 Downloads )
	IP Logged

shipwreck 4 Star Member Offline Navy Vet Posts: 285 Location: Medina Ohio Joined: Jun 20^th, 2018	Re: Hiller X-2-235 Reply #17 - Jul 25^th, 2018 at 1:31pm	Print Post
	Thanks Ray, Paul


	IP Logged

Page Index Toggle

Pages: [1] 2 3

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

Stick and Tissue Forum » Powered by YaBB 2.6.11!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge