Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Engine cylinders (Read 429 times)
4 Star Member

Controled landings are

Posts: 428
Location: Lawrenceburg tn
Joined: Oct 28th, 2019
Engine cylinders
Nov 1st, 2019 at 5:22am
Print Post  
I work in a pharmacy, and use those pop off tops on my Ed bottles....and looking for cylinders for the aerobic c3, thought it would work out....I drill a hole, insert small nail, Chuck it in the dermel, at slow speed, use a xacto to slowly cut it, then a nail board to sand it/ thin the edges.
Now to do 7 more for the pt17

Any plastic could be used...and your nail stays as a centering pin to mount each cylinder.

( 55 KB | 99 Downloads )
Back to top
IP Logged
Page Index Toggle Pages: 1
Send TopicPrint