(Moderators: BillParker, Sky9pilot, thymekiller)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic DURHAM MYSTERY PLANE (Read 1145 times)
MKelly
5 Star Member
*****
Offline



Posts: 1325
Location: Helotes, TX
Joined: Apr 11th, 2017
Re: DURHAM MYSTERY PLANE
Reply #3 - Jan 28th, 2020 at 7:07am
Print Post  
Correct!
  
Back to top
 
IP Logged
 
bigrip74
Ex Member


Re: DURHAM MYSTERY PLANE
Reply #2 - Jan 27th, 2020 at 11:03pm
Print Post  
Thanks Mike. OK! So not a physical box but a volume of space that will accept that box?
  
Back to top
 
IP Logged
 
MKelly
5 Star Member
*****
Offline



Posts: 1325
Location: Helotes, TX
Joined: Apr 11th, 2017
Re: DURHAM MYSTERY PLANE
Reply #1 - Jan 27th, 2020 at 8:24pm
Print Post  
Bob,  the box indicates the fuselage can contain the volume specified in line A.6 of the Embryo rules: ("Fuselage volume to enclose a space 1.25x1.50x3.00 inches or larger.")

Cheers,

Mike
  
Back to top
 
IP Logged
 
bigrip74
Ex Member


DURHAM MYSTERY PLANE
Jan 27th, 2020 at 5:47pm
Print Post  
I started a Durham Mystery Plane kit from Volare and I noticed on the plans indicated in red "REQUIRED EMBRYO BOX IN RED".

Read the FAC embryo rules, but cannot find anything on a box placed in the center section of the fuselage.

Any thoughts?
  
( 191 KB | 96 Downloads )
DMP_001.jpg
( 251 KB | 85 Downloads )
DMP_002.jpg
( 221 KB | 84 Downloads )
DMP_003.jpg
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

Stick and Tissue Forum » Powered by YaBB 2.6.11!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge