(Moderators: thymekiller, BillParker, Sky9pilot)
‹ No Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic 20mm EDF DH108 Swallow (R/C Conversion) (Read 1209 times)
pb_guy
5 Star Member
*****
Offline


So I'm just a kid at heart.

Posts: 1944
Location: Youbou, BC, Vancouver Island
Joined: Oct 15th, 2014
Re: 20mm EDF DH108 Swallow (R/C Conversion)
Reply #3 - Aug 3rd, 2020 at 11:14pm
Print Post  
Big grin! Looks wild!  Smiley
ian
  
Back to top
 
IP Logged
 
Nitrocharged
New Member
*
Offline


Team30 Micro EDF

Posts: 3
Location: Australia
Joined: Aug 3rd, 2020
Re: 20mm EDF DH108 Swallow (R/C Conversion)
Reply #2 - Aug 3rd, 2020 at 7:37pm
Print Post  
Wingspan: 15.5"
Battery: 150mah 2S
Receiver: Orange micro 4 channel
Fan: Custom built 20mm EDF (3D printed on a Michelangelo) using a 0703 outrunner and clipped 3 blade micro quad-copter propeller.

Maiden was a little squirrely!

https://www.youtube.com/watch?v=BLnQS6RbK-8

After a mod the next flights were much better!

https://www.youtube.com/watch?v=CjmBGM5Uf1Q
  
( 187 KB | 55 Downloads )
flight.jpg
( 161 KB | 57 Downloads )
flight_2.jpg
( 127 KB | 55 Downloads )
flight_5.jpg
Pushing the Limits!
Back to top
WWWYouTube  
IP Logged
 
Nitrocharged
New Member
*
Offline


Team30 Micro EDF

Posts: 3
Location: Australia
Joined: Aug 3rd, 2020
Re: 20mm EDF DH108 Swallow (R/C Conversion)
Reply #1 - Aug 3rd, 2020 at 7:36pm
Print Post  
My thoughts were for it to be a replacement for jetex motors since the rules are quite strict Down Under, so a jetex plan seemed the logical choice. I settled on a DH108 Swallow designed by Steve Bage. It came in at 50g inc. battery.
  
( 295 KB | 66 Downloads )
DH108_9.jpg
( 258 KB | 65 Downloads )
DH108_13.gif
( 222 KB | 70 Downloads )
DH108_final.jpg
Pushing the Limits!
Back to top
WWWYouTube  
IP Logged
 
Nitrocharged
New Member
*
Offline


Team30 Micro EDF

Posts: 3
Location: Australia
Joined: Aug 3rd, 2020
20mm EDF DH108 Swallow (R/C Conversion)
Aug 3rd, 2020 at 7:35pm
Print Post  
I was working on a 20mm EDF fan unit some time ago and although the fan was done, I had no jet to put it in.
  
( 197 KB | 81 Downloads )
20mm_6.jpg
( 251 KB | 69 Downloads )
20mm_7.jpg
Pushing the Limits!
Back to top
WWWYouTube  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ No Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

Stick and Tissue Forum » Powered by YaBB 2.6.11!
YaBB Forum Software © 2000-2022. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge