Stick and Tissue Forum - J-6-9 1/32 radial

Stick and Tissue Forum › Plastic Models for our members who stray to plastic. › Plastic for those modelers who wander from S&T › J-6-9 1/32 radial

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

Normal Topic

J-6-9 1/32 radial (Read 623 times)

Kaintuck 5 Star Member Offline Controled landings are best! Posts: 572 Location: Lawrenceburg tn Joined: Oct 28^th, 2019	Re: J-6-9 1/32 radial Reply #6 - Feb 20^th, 2021 at 8:46am	Print Post
	Needs throttle control lever, and couple knobs for the power panel....


	IP Logged

DAVE Q Global Moderator Offline I Love YaBB 2.5 AE! Posts: 351 Location: FLEETWOOD PA Joined: Aug 24^th, 2016	Re: J-6-9 1/32 radial Reply #5 - Jan 22^nd, 2021 at 3:05pm	Print Post
	COOL, Love it.


	IP Logged

Kaintuck 5 Star Member Offline Controled landings are best! Posts: 572 Location: Lawrenceburg tn Joined: Oct 28^th, 2019	Re: J-6-9 1/32 radial Reply #4 - Jan 22^nd, 2021 at 1:55pm	Print Post
	The wires needs soldering and another brace to support the motor. And I think a set of gauges and controls for test run ups should be added.... Almost done....and yup, she runs the prop, there's 2 AA batts in the box. Marc


	IP Logged

Kaintuck 5 Star Member Offline Controled landings are best! Posts: 572 Location: Lawrenceburg tn Joined: Oct 28^th, 2019	Re: J-6-9 1/32 radial Reply #3 - Jan 18^th, 2021 at 5:54am	Print Post
	One mag on....the wires are black thread .... Thanks fellas...I know I need a larger magnifier glass...and steadier hands ...I want to do that shapeways 144scale Mercedes benze motor.... not sure I can stay steady enuff that small tho.... Marc


	IP Logged

Sky9pilot Administrator Offline Stick & Tissue Posts: 12995 Location: Kelso, WA 98626 USA Joined: Jan 9^th, 2010	Re: J-6-9 1/32 radial Reply #2 - Jan 16^th, 2021 at 1:18pm	Print Post
	neoflight wrote on Jan 15^th, 2021 at 6:48pm: Marc Your radial really looks great. Don't see any flaw at all. Keep up the good work. Neoflight Ditto what Neo said...look forward to seeing it mounted!

	If God is your Co-pilot...switch seats... Your attitude will determine your altitude!- John Maxwell And ye shall know the truth, and the truth shall set you free. Jn 8:32
	Skype/VoIP Facebook IP Logged

neoflight 4 Star Member Offline ...now how am I gonna get that down! Posts: 256 Location: West Tennessee Joined: Feb 15^th, 2019	Re: J-6-9 1/32 radial Reply #1 - Jan 15^th, 2021 at 6:48pm	Print Post
	Marc Your radial really looks great. Don't see any flaw at all. Keep up the good work. Neoflight


	IP Logged

Kaintuck 5 Star Member Offline Controled landings are best! Posts: 572 Location: Lawrenceburg tn Joined: Oct 28^th, 2019	J-6-9 1/32 radial Jan 15^th, 2021 at 3:05pm	Print Post
	Trying to do a sorta scale from the Williams brothers kit. The carb box and preheat stuff didn't line up, and engine 'dolly' needed to be stiffer than a scale set because there's a pager motor buried in there...it'll set on a battery box, flip the switch and the prop spins..... My 1st try at motors....still needs much..... Marc


	IP Logged

Page Index Toggle

Pages: 1

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

Stick and Tissue Forum » Powered by YaBB 2.6.11!
YaBB Forum Software © 2000-2023. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge