Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Ukrainian Resistance Embryo (Read 131 times)
Kittyfritters
5 Star Member
*****
Offline


Stick & Tissue

Posts: 796
Location: California
Joined: Feb 24th, 2011
Re: Ukrainian Resistance Embryo
Reply #3 - May 5th, 2022 at 1:04am
Print Post  
Here is the production version of Ukrainian Resistance finished and tested. It flies just like the original prototype but is easier to build and gets all the FAC bonus points.  It was released at the Black Sheep meeting in Burbank tonight (Wednesday) and will be available from my web site tomorrow (Thursday) evening.

KF
  

( 264 KB | 5 Downloads )
Ukrainian_Resistance_production_1.jpg

Qua sublata omnia praecepta legis
Back to top
WWW  
IP Logged
 
Kittyfritters
5 Star Member
*****
Offline


Stick & Tissue

Posts: 796
Location: California
Joined: Feb 24th, 2011
Re: Ukrainian Resistance Embryo
Reply #2 - May 2nd, 2022 at 6:40pm
Print Post  
Doing a final build of the production version to make sure that my assembly instructions are correct and that it can be built with PVA glue.  (I've been accused of designing some models that have to be built with CA.)  Shooting for 5/04 release.

KF
  

( 173 KB | 9 Downloads )
Build_4_Smaller.jpg

Qua sublata omnia praecepta legis
Back to top
WWW  
IP Logged
 
Kittyfritters
5 Star Member
*****
Offline


Stick & Tissue

Posts: 796
Location: California
Joined: Feb 24th, 2011
Re: Ukrainian Resistance Embryo
Reply #1 - Apr 28th, 2022 at 10:53pm
Print Post  
The nose was too tight to get a pusher stick or blast tube through so I opened it up a bit.  I also gave it an FAC bonus point slant windshield, added exhaust stacks, and a "Ghost of Kyiv" pilot figure.  The parts sheets have been finalized, plan redrawn and as soon as I have the assembly instructions re-edited the kit will be released.

KF
  

( 261 KB | 7 Downloads )
Parts_Sheets_smaller.jpg
( 353 KB | 4 Downloads )
Ghost_On_Plan_Smaller.jpg

Qua sublata omnia praecepta legis
Back to top
WWW  
IP Logged
 
Kittyfritters
5 Star Member
*****
Offline


Stick & Tissue

Posts: 796
Location: California
Joined: Feb 24th, 2011
Ukrainian Resistance Embryo
Apr 13th, 2022 at 2:20pm
Print Post  
I decided to call my new Embryo design "Ukrainian Resistance"  (inspired by Cleveland Models "Polish Valor" at the beginning of WW2.) and when in kit donate $5 of every kit sold to Ukrainian relief.

The sketch and video are of the first prototype.  The changes I need for production are already on the board and I should have it tested next Wednesday and in kit by the end of next week.

The video isn't the greatest but you get the idea.

https://www.youtube.com/shorts/Wf8c4QKuSU0
« Last Edit: Apr 13th, 2022 at 6:10pm by Kittyfritters »  

( 122 KB | 6 Downloads )
g7738.png
( 149 KB | 11 Downloads )
UR_Bones_Smaller.jpg
( 168 KB | 10 Downloads )
UR_Mk1_Smaller.jpg

Qua sublata omnia praecepta legis
Back to top
WWW  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint