Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Printing on tissue by FSM (Read 56 times)
5 Star Member

Build! Fly! Enjoy!

Posts: 3389
Location: Roy, Utah
Joined: Oct 5th, 2015
Re: Printing on tissue by FSM
Reply #1 - Mar 12th, 2023 at 9:17am
Print Post  
This process can seem to be very laborious...but if carefully executed can result in a model that's very pleasing.  If one scours the 'net...sometimes "skins" can be found that if of sufficient resolution can really do the trick.  Here's my Aviatik that to date is the only model I've ever done this to...completely covered with printed skins.

Mike Kelly is a true artist with this technique...check out his "Thud" build.

Thanks for the video, Tom. Smiley


( 83 KB | 6 Downloads )
( 73 KB | 6 Downloads )
( 69 KB | 8 Downloads )
( 75 KB | 10 Downloads )
( 126 KB | 8 Downloads )
( 138 KB | 10 Downloads )
Back to top
IP Logged

Stick & Tissue

Posts: 12909
Location: Kelso, WA 98626 USA
Joined: Jan 9th, 2010
Printing on tissue by FSM
Mar 11th, 2023 at 3:57pm
Print Post  
Fun Scale Models (FSM) has produced a very good video on how to print on tissue using an inkjet or laser printer.  Click Here for Video

If God is your Co-pilot...switch seats...
Your attitude will determine your altitude!- John Maxwell
And ye shall know the truth, and the truth shall set you free. Jn 8:32
Back to top
IP Logged
Page Index Toggle Pages: 1
Send TopicPrint